In Painters

If you have been wondering how professional painters like Dyson Painters Hobart get such a fantastic finish, then check out this article on how to use a roller!

Tips on how to use a roller! If you’re not a professional painter already, you’re probably looking for some tips on how to get your next painting project looking like a million dollars. Lucky for you Dyson Painters Hobart have years of experience and knowledge in the painting industry to pass on to you. Sometimes all you need is the right advice to take a DIY project to the next level!

When it comes to any painting, either with a roller or a brush, high-quality painting equipment is essential if you’re looking for a top finish. It may seem like saving a few dollars on painting equipment is a good way to save you money, but it could end up costing you a lot more in the long run.

Dyson Painters recommends a high-quality paint such as Haymes Paint and if you’re looking for a paint shop in Hobart, then head into The Tasmanian Paint Shop located at 210 Murray Street, Hobart. Tell them Dyson Painters Hobart sent you! Hobart Painters

Investing in high-quality paint and premium painting equipment will help close the gap between DIY and professional finishes. You’re not always going to get that professional finish, but let’s be honest, they’re called professionals for a reason. If you’re looking for professional painters in Hobart, Tasmania, then why not contact the team at Dyson Painters Hobart? They’ll be sure to give you a competitive quote!

Tips On How To Use A Roller!

  • 6 – 8 mm nap covers are used for gloss, and semi-gloss paints, 10 – 12 mm nap covers are used for low sheen, and flat paints on walls and the 20 – 32 mm nap covers are good for rough surfaces like textured walls or contract.
  • To get rid of the fuzz off your new roller sleeves before you start painting, gently wash them in water before you paint.
  • Pour your paint into well located at the end of your roller tray. Don’t get carries away and overfill it!
  • Dip your roller into the paint until just under half the roller is covered in paint. Now, roll it back and forth along the ramp on the paint tray until the paint is evenly distributed on the roller.
  • Start rolling the paint onto the wall in a large zig-zag Now, go back and fill in the gaps using a crisscross pattern.
  • When you have completely covered the surface or area, you’re working on, finish off by laying-off. This is done with long parallel roller strokes. You need to do this before the paint dries, so finish one area before you move onto another.
  • Once you finish, don’t leave your paint roller to dry. If you plan on painting again in a few hours or the next day, then you can wrap it in cling wrap and pop it in the fridge.
  • If you have a lot of edges, then a paint application pad is the tool to use. Start off by loading up your paint pad. Next, put it onto the wall and make sure the wheels are and then run it around your doors, skirting boards, corners, or windows. Use long strokes with a firm, but even amount of pressure.

If all this sounds like too much hard work, then give the professional and friendly team at Dyson Painters Hobart and call on 0417 580 981! They’re a professional painting company located in Hobart, Tasmania, but can travel and all quotes are 100% free. Contact them today!

Recommended Posts
dyson painters hobart